Structure Chart

Dimension Figure (Unit: mm） 

Product Parameters

Product Functions

l  Basic Functions

Ø  Passing mode switching function：Both the entry and exit can be set to be【controlled mode】 /【 free mode 】/【 forbidden mode】independently.

Ø  Automatic reset function: The turnstile will open the gate after receiving the valid opening signal when standby. The swing gate will return to the hindering zero position automatically under the following situation:

（1）Within the allowed time, pedestrians have been detected to pass through the passageway in specified direction;

（2）Over the allowed time, no pedestrians are in the passageway.

Ø  Self-recovery function: If the swing gates do not return to the hindering zero position because of human intervention, after revoking human intervention, the gate automatically will return to the hindering zero position.

Ø  Automatic adjustment function: When the turnstiles need to readjust because of mechanical wear, the main control board can adjust automatically, accurately and conveniently.

Ø  Memory function of passing requests: When more than 2 passing signals are given at the same time (including the same direction and opposite direction), the system will remember all the passing requests and finish them one by one. The number can be up to 255.

 Ø  Passing direction indicator:

（1）Direction indicator: The direction indicator is installed on the top of the housing to indicate the legal passing direction. 

（2）Passing status indicator: It is installed inside the housing, indicating whether the swing gates can open after receiving the valid signal.

Ø  Compatibility：Equipped with the dry contact signal input interface, RS485/RS232 interface, TCP/IP interface (optional), compatible with all kinds of access controllers.

l  Security Design

Ø  Self-check function when power on: The system will self-check routinely and alarm when the power is on, and intelligently detect the key hardware and function. Find the hidden danger within the shortest time!

Ø  Ø  Open gate when power off: Adopted with the leading mechanical structure by original creation, the system will automatically unlock the swing gates when power off. The gates can be manually pushed to be open and convenient for evacuation, which meets the fire protection requirement.

 Note: This diagram is just for function reference. 

Ø  Anti-clamping function:

  Note: This diagram is just for function reference.

    （1）Infrared anti-clamping:  Install multi-pair of infrared sensors near the anti-clamping area where swing gate is moving. Once any person or object is detected within the anti-clamping area, the swing gate will automatically stop moving. The swing gate will not continue to move until the person or object leaves the anti-clamping area.

    （2）Machinery anti-clamping: The swing gate will automatically stop moving when it encounters obstacles; the impulse force is  within the safety range when the swing gate is moving. 

    （3）Electric current detection anti-clamping: If the gate encounters obstacles during its moving, and the system detects the abnormal current, the motor will stop or reversely move to prevent clamping pedestrian.

Ø  Over-force feedback control function：When the gate is locked, it can support the impulse force within the safety range. If the impulse force is over the safety range, the gate can be manually pushed slowly so as to protect the mechanism and pedestrian, and then recovers automatically. 

Ø  Emergency escape function：Equipped with emergency escape control device, the system can automatically open the gate to evacuate pedestrians conveniently.

Ø  Intelligent linkage alarm：Illegal traffic events can be linked with other alarm monitoring equipment: such as access control systems, video management systems.